https://www.zubersoft.com/mobilesheets/forum/ 2026-08-03T06:00:32Z MyBB staggart]]> 2026-06-15T17:56:07Z 2026-06-15T17:56:07Z https://www.zubersoft.com/mobilesheets/forum/thread-15363.html
I'd like to request that mobilesheets change its behavior such that it is always listening for a connection from the companion (this is easy to do with a listen and notify model, see here: https://share.google/aimode/TiBaotVP0DkQDAsdY ).  Now you have to go to MS and use the "Connect to Companion" command and then go to the companion and complete the connection (which often doesn't work and the process has to be repeated multiple times, often resetting MS and possible rebooting the Chromebook).

I think none of this is necessary and could be greatly simplified by have MS have a background listen always pending.  When a connect request comes in from the companion, a connection can be made.  When the companion disconnects, MS goes back to regular, disconnected mode and starts another background listen.

I use MS on one room and run companion in a different room.  This constant walking back and forth to connect (especially when it fails) is disruptive.

Thanks for your consideration.]]> false ericjak]]> 2026-06-14T17:05:42Z 2026-06-14T17:05:42Z https://www.zubersoft.com/mobilesheets/forum/thread-15356.html
Thanks]]> false jtoon86]]> 2026-04-20T14:50:25Z 2026-04-20T14:50:25Z https://www.zubersoft.com/mobilesheets/forum/thread-15091.html
I have another group that will be having a director change in about two months ... His group has 8 tablets currently and he was simply sharing a dropbox folder and everyone in the group opens a shared PDF he creates of all the music for the service (no mobilesheets or other sheet music app).

If we load MobileSheets on each of these tablets and hand it over to the new music director, I'm wanting to understand the easiest way to maintain this. For me, using the companion app to enter set lists for the next few weeks is easy but I haven't gone the next step and distributing this to other devices. Is there options for a primary device/location (dropbox, google drive, etc) and the other devices will simply sync updated music/set lists/etc the choir members can simply open MobileSheets and have the latest set lists available?

Trying to figure out if this is a good solution .. I know the new director is a bit old school, so trying to come up with a solution that is easy on him and still lets the teens feel like they are not "going backwards" by having to deal with paper vs the tablets they have been using for years (he has already stated wanting to stay with paper which I know the teens will see as a regression).]]> false sciurius]]> 2026-03-23T07:05:03Z 2026-03-23T07:05:03Z https://www.zubersoft.com/mobilesheets/forum/thread-14946.html pageturner for MobileSheets?

Fragment from 'Podium Klassiek', NPO1 (dutch television), 2026-03-22.]]> false roseatkinson]]> 2026-02-27T08:04:38Z 2026-02-27T08:06:04Z https://www.zubersoft.com/mobilesheets/forum/thread-14850.html
https://jimendez.com/noteturner?utm_medi...yUjaGzPy4w]]> false nojean11]]> 2026-02-27T00:40:46Z 2026-02-27T00:40:46Z https://www.zubersoft.com/mobilesheets/forum/thread-14848.html
  IMG_5300.JPG (Size: 1.42 MB / Downloads: 5) ]]> false qrp]]> 2026-02-06T15:51:10Z 2026-02-06T15:51:10Z https://www.zubersoft.com/mobilesheets/forum/thread-14754.html false catch22]]> 2026-02-01T10:37:48Z 2026-02-01T10:37:48Z https://www.zubersoft.com/mobilesheets/forum/thread-14726.html I have, till now, reacted by clicking on the Rating icon, but wonder if this is how it's done here usually?
Or is it better to actually reply with a "Thank you" message?]]> false e.k.]]> 2026-01-27T13:13:25Z 2026-01-27T13:51:10Z https://www.zubersoft.com/mobilesheets/forum/thread-14702.html
Would need some support for using MIDI commands.


thx in advance
e.k.]]> false RomanEisenlauer]]> 2026-01-12T10:22:27Z 2026-01-12T10:22:27Z https://www.zubersoft.com/mobilesheets/forum/thread-14628.html My Usecase is: i want to prepare a rough setlist, but i want to be able to skip within the list at will.
My Band Members do not even have the setlist on their device necessarily.
Is this possible ?
Best,
Roman]]> false Lester]]> 2025-12-24T10:42:48Z 2025-12-24T10:42:48Z https://www.zubersoft.com/mobilesheets/forum/thread-14522.html
Mike Zuber is another person on my mind as someone who never seems to get a break. I am aware that he has many big plans for MobileSheets while, at the same time, we bombard him with more questions, problems, requests and more.

My wife is a piano teacher and gets 2 weeks off around Christmas and New Year. I hope Mike and his family and his programmer and his/her family will get a decent Christmas break.]]> false MSUser]]> 2025-11-24T10:11:53Z 2025-11-24T10:11:53Z https://www.zubersoft.com/mobilesheets/forum/thread-14343.html
Hey everyone, I don't know if I'm the only one who uses MSpro for multiple backing tracks, but it's really handy. I used to use a looper for this, but it's much easier to work with MSpro's built-in audio player because you can use the right tracks for each song you open, and you only need the looper for looping, not for playing backing tracks.
 I've created short, simple drum loops for each of my songs at the right tempo (bps) and style (rock, pop, blues, etc.) and play them back as MP3s or WAV files using MSpro's built-in audio player. Even though you can't add fills, it works perfectly. You can also play in short sequences like riffs or samples, which really enhances the performance. I control the tracks with footswitches using an iRig BlueTurn (2 switches) or an AirTurn Quad 500 (4 switches). I had some latency issues at first, but I've mostly resolved them.  I connect the tablet (Android) directly to the mixer via the headphone output, resulting in only one Bluetooth connection from the tablet to the iRig or AirTurn and very low latency. The second switch allows you to control the metronome and optionally create a simple beat with kick and hi-hat. With the four switches, you can even integrate entire sections like verse or chorus as guitar accompaniment in MP3 or WAV format, allowing you to play solos over them. This significantly enhances the overall experience. 
Now I'm trying to work with multiple tracks like intro, verse, chorus 1, chorus 2, etc. However, I've noticed that short gaps occur when switching tracks because the app needs time to load each one. This unfortunately renders my idea unusable. 
Mike from Zubersoft suggests setting the crossfade duration to zero. However, he's hesitant to program this because he's unsure if it might introduce other problems.  He thinks I'm probably the only one who needs this option and that I should ask in the forum if more people are having the same problem. I think then he might give it a try. 
So my question is: Has anyone here in the forum tried this before, or does anyone know of another solution to the problem? Thanks in advance and best regards to all MSpro fans!]]> false Jschrepf]]> 2025-11-17T17:50:20Z 2025-11-17T17:50:20Z https://www.zubersoft.com/mobilesheets/forum/thread-14283.html
Scanning sheets  with mobile phone or tablet would be a great feature for import.
Is this planned? 


It is not convenient to use a seperate tool like Microsoft or google lens.

Thank you.]]> false e.k.]]> 2025-11-05T15:21:16Z 2025-11-05T15:21:16Z https://www.zubersoft.com/mobilesheets/forum/thread-14238.html
At present the loop markers disappear if "B" is tapped and are only visible if loop is activated.
This would make sense also, because the loop markers are saved, even when MS is closed, but one wouldn`t remember
that a loop is set already.


Would it be possible also, if setting a loop and "A" is" tapped, that the setting "audio player fade out after 5 sec" is temporarly disabled until
"B" is tapped? Usually I like and use the "fade out" option.


thx in advance,
e.k.]]> false Franky Goethals]]> 2025-10-27T15:21:39Z 2025-10-27T15:21:39Z https://www.zubersoft.com/mobilesheets/forum/thread-14186.html

I'm so good as brand-new in the mobilesheets-world and cannot find any answer to the following:

• I've uploaded a pdf-book in MS
  
• the book has an accompagning CSV with bookmarks
  
• WORKS FINE for going throuth the book but following the bookmarks only (alphabetical)
  

I would like to 'walk' through the book also like a normal book, so going from page 1 tot the end, not in order of the alphabetic bookmarks.

I'm quite sure i've overlooked this info somewhere, as this look to stupid as question...

Anyone that can help me please?]]> false